spare part, trussrod adjustment key
string winder with dual string clipper, bridge pin remover, 10mm spanner and flat-blade screw drive
"Punch-a-Pick" pick cutter, max thickness 2mm
cleaner spray KONTAKT 60, 100ml spray can
cleaner spray KONTAKT 60, 200ml spray can
rubber edged grain filler applicator - 150mm width
allen wrench, 1.5mm
allen wrench, 2.0mm
allen wrench, 2.5mm
allen wrench, 3.0mm
allen wrench, 4.0mm, 8.0mm long
allen wrench, 4.0mm, 30.0mm long
truss rod wrench, for 9/32" nut
truss rod wrench, for 5/16" Gibson nut
allen wrench set with holder and screws, 4 sizes, 1.5/2.0/2.5/3.0mm
allen wrench, 1.27mm, .050"
allen wrench, 5.0mm, 30.0mm long
guitar neck support, wood, short model
3 in 1 diamond fret crown file three width sizes
fret end file (pencil like shape) for precise filing, for small frets (R=1mm)
fret end file (pencil like shape) for precise filing, for medium frets (R=2mm)
fret end file (pencil like shape) for precise filing, for wide frets (R=3mm)
fret end file, extra fine (15cm length, 3mm width, 2mm thickness)
dual grit mini diamond plates, for honing sharp fret ends and sharpening knives, 150/600 grit
dual grit mini diamond plates, for honing sharp fret ends and sharpening knives, 400/1000 grit
diamond fret file, for levelling and bevelling
fret finishing file, for narrow frets (19,5cm length, 16mm width, 4mm thickness)
set of 10 thin nut files
set of 11 thin nut files
nut file 15 cm length, teeth per inch: 73, 010" / 0,25 mm
