stainless steel ruler, 15cm length
stainless steel ruler, 30cm length
stainless steel ruler, 60cm length
pickup routing template humbucker
Snapz bridge pin puller 2.0
soundhole clamp, 12,5cm (5") length
soundhole clamp with leveler, 17,5cm (7") length
soundhole clamp with leveler, 22,5cm (9") length
soundhole clamp with leveler, 28 cm (11") length
pickup routing template ST
pickup routing template TE bridge
pickup routing template TE neck
pickup routing template P90
pickup routing template Filtertron
pickup routing template set PB, 2 pcs
pickup routing template set JB neck, 2 pcs
pickup routing template set JB bridge, 2 pcs
step drill for Rotomatic type tuners, 9.9mm and 7.8mm diameter
step drill for tuners, 8.6mm and 7.0mm diameter
stainless steel fret levelling file, hard chrome coating, 160x28x5mm
fret puller, carbon steel, blade width 5,0mm, flat blade thickness 0,40mm
bracing saw, 66x0.2mm blade
wood saw rasp, open non-clogging blade design, high-carbon steel, 200mm length
wood saw rasp, open non-clogging blade design, high-carbon steel, 250mm length
seam separation knife
work mat, grill cloth
work mat, tweed
neck shims for bass, shaped, set of 3 (0,25 / 0,5 /1 degree)
Bullet 2.0 guitar jack tightener, for 1/2" nuts
Fretbar understring leveler, 11,5 cm length
Fretbar understring leveler, 23 cm length
Fretbar understring leveler, 45,5 cm length
chisel starter set of four wood chisels (3/6/12/24 mm) in a canvas roll-up tool bag
string winder with string clipper and bridge pin remover
ESP multi spanner
endpin jack wrench
Jack the Gripper
fingerboard guards for guitar, set of 6
fingerboard guards for bass, set of 4
understring radius gauges, standard width, set of 9
stainless steel scalpel holder #4, for blades 20 up to 23
surgical scalpel blades no.26, sterile, straight cutting edge, 20 pieces
brace repair jack
3M pickguard adhesive sheet
fret saw guide
stainless steel fret cutter with near-flat jaws, requires little filing of ends
2-in-1 precision + notched straightedge for short scale (24 3/4" - 25") guitar
2-in-1 precision + notched straightedge for long scale (25.3"- 25.5") guitar
understring radius gauges, standard width, set of 4
archtop guitar helping hand
refret saw, 0.018" (0,46 mm) blade thickness
refret saw, 0.023" (0,58 mm) blade thickness
surgical scalpel blades no.23, non-sterile, 20 pieces
Bullet 2.0 guitar jack tightener, for 11mm nuts
Pullit knob puller
mini cam clamp
large cam clamp
neck support caul
locking contour gauge
string spacing rule
resin brace gluing wedge
neck shim 0.25 degree shaped for electric bolt-on neck guitar
neck shim 0.50 degree shaped for electric bolt-on neck guitar
neck shim 1.00 degree shaped for electric bolt-on neck guitar
guitar/bass multi-tool
bronze fretting hammer, flat sides and curved side, total length 300 mm
fret tang nipper, easy fret tang cutting job, for medium frets
fret tang nipper, easy fret tang cutting job, for jumbo frets
The Arch Work Station
step gauge for guitar, measuring string height, fret crown heigth, nut slot height
Groobar, aid to determine nut slot height, 4/set
fret setter for resetting frets without loosening the strings, for small, medium and wide frets
fret hammer two heads, plastic/steel, weight: 225gr, head diameter: 25mm x 75mm, length: 330mm
fret slot saw, carbon steel, thickness: 0,50 mm, universal cutting teeth, tooth spacing 1.25mm
fret slot saw, carbon steel, thickness: 0,60 mm, universal cutting teeth, tooth spacing 1.25mm
fret puller, carbon steel, blade width 10,0mm, flat blade thickness 0,40mm
fret cutter, high carbon steel, blade width 26mm, not suitable for stainless steel frets
set of 5 scrapers small scraper set
set of two wide scrapers, size: 120 x 44mm, thickness: 0,40mm
wide straight scraper, size: 150 x 55mm, thickness 1,0mm
stainless steel fingerboard radius gauge + string height check, for 7,25"- 9,5"-10"-12"-14"-16"
hex screwdriver allen wrench for comfortably adjusting bridge saddle, thickness: 1,5mm
guitar tech padded mat, with magnetised storing area for small parts
CruzTools tool kit
