step drill for tuner installation
stainless steel fret levelling file, hard chrome coating, 160x28x5mm
step gauge for guitar, measuring string height, fret crown heigth, nut slot height
chisel starter set of four wood chisels (3/6/12/24 mm) in a canvas roll-up tool bag
Groobar, aid to determine nut slot height, 4/set
fret setter for resetting frets without loosening the strings, for small, medium and wide frets
bronze fretting hammer, flat sides and curved side, total length 300 mm
fret hammer two heads, plastic/steel, weight: 225gr, head diameter: 25mm x 75mm, length: 330mm
fret saw guide
fret slot saw, carbon steel, universal cutting teeth, tooth spacing 1.25mm
fret puller, carbon steel, flat blade thickness 0,40mm
fret tang nipper, easy fret tang cutting job
fret cutter, high carbon steel, blade width 26mm, not suitable for stainless steel frets
stainless steel fret cutter with near-flat jaws, requires little filing of ends
bracing saw, 66x0.2mm blade
wood saw rasp, open non-clogging blade design, high-carbon steel
stainless steel fingerboard radius gauge + string height check, for 7,25"- 9,5"-10"-12"-14"-16"
hex screwdriver allen wrench for comfortably adjusting bridge saddle, thickness: 1,5mm
guitar tech padded mat, with magnetised storing area for small parts
step drill for Rotomatic type tuners, 9.9mm and 7.8mm diameter
step drill for tuners, 8.6mm and 7.0mm diameter
stainless steel ruler, 15cm length
stainless steel ruler, 30cm length
stainless steel ruler, 60cm length
fret slot saw, carbon steel, thickness: 0,50 mm, universal cutting teeth, tooth spacing 1.25mm
fret slot saw, carbon steel, thickness: 0,60 mm, universal cutting teeth, tooth spacing 1.25mm
fret puller, carbon steel, blade width 5,0mm, flat blade thickness 0,40mm
fret puller, carbon steel, blade width 10,0mm, flat blade thickness 0,40mm
fret tang nipper, easy fret tang cutting job, for medium frets
fret tang nipper, easy fret tang cutting job, for jumbo frets
wood saw rasp, open non-clogging blade design, high-carbon steel, 200mm length
wood saw rasp, open non-clogging blade design, high-carbon steel, 250mm length
set of 5 scrapers small scraper set
set of two wide scrapers, size: 120 x 44mm, thickness: 0,40mm
wide straight scraper, size: 150 x 55mm, thickness 1,0mm
hex screwdriver allen wrench for comfortably adjusting bridge saddle, thickness: 1,5mm
